Question about PIXMA MP160 All-In-One InkJet Printer
How do you Delete document and photos once saved to PC I've been unable to delete many pages of documents that I've 'saved to PC,' using the MP160 software. I've searched thoroughly the on screen ...
Question about PIXMA MP160 All-In-One InkJet Printer
...by pressing the center or set button. You may need to confirm by pressing again. You can also erase all by accessing the menu and then navigate to the ERASE ALL on the menu and hitting the set
press MENU button and go to left end tab menu items. Navigate to "Digital Zoom" and select the desired¡red setting: ON or OFF. Remember that digital zoom can't be used if the screen is turned off
Question about PowerShot SD960 IS Digital Camera
how do I get the date stamp off the image? 1 Press the "Func./Set" button and select "Recording Pixels" and "Postcard". The camera is now set to "Postcard" mode. 2 Open the "Rec." menu by pressing the
How do I set the date and time spamp on a Canon A490 Hello and Welcome to FixYa! To set the date and time stamp on pictures, Follow the given instructions: Setting Date and Time: First of all set the ...
...menu button 2. Navigate to the "Date Stamp" Setting 3. Press Left and right arrow buttons to toggle the "Off", "Date", or "Date/Time" settings, then leave it on the "Date/Time" 4. Connect the camera ...
Question about imagePROGRAF iPF650 largeformat colour inkjet InkJet Plotter Printer
...get into service mode for canon ipf650 Power off the printer, then hold "Load" and "Navigate" while powering on, until the display shows "Starting Up".The Service Menu is in the settings menu, on
menu does not appear on the panel. there is no menu or instructions on the panel of the printer. Say I want to fax/scan, no instructions appear. The panel is blank. I can print but can't do the ...
Question about PIXMA MP160 All-In-One InkJet Printer
I can print from my canon mp160 but i can't scan. how can i do for scan. I can print from my canon mp160 but i can't scan. how can i do for scan. Scanning can be performed with the MP ...
...printer on and open the menu. Use the directional arrows to navigate through the setup menu. Go to Device settings and press OK. Now select the Reset settings option and press OK to start the
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions