Question about OfficeConnect Wireless Router
...NAT default setting to enable. 2. Display URL block message. 3. Modified settings to apply right away. (only partial settings, some of settings still need reboot) 4. Wizard does not ?pop up? after ...
Question about Playstation 3 (PS3) Console
...2.1 - By default, the password is blank. - Click on System setting under "Utilities". - Against the heading "UPNP Enabling", choose "Enable". - Click on "Apply changes". Note: The NAT feature on the ...
Question about ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B)
2) log in as admin, default password admin (PLEASE CHANGE THIS AT SOME POINT IF YOU HAVEN'T ALREADY) 3) Click the yellow HOME tab 4) Click the WAN button on the left (it's the third button down on the
...NAT) Packet filtering RFC 2364 Point-to-Point Protocol over ATM PVCs (PPPoA) RFC 2516 Point-to-Point Protocol over Ethernet (PPPoE) RFC 2684 (formerly 1483) Bridged Ethernet and routed encapsulation ...
NAT/NAPT , PAP/CHAP, IP Filter, Firewall, protocol block Built-in PPPOE/PPPOA dialing.. you can try two option: 1. your modem is equip of supporting dhcp server, if u can access ur modem and set it to
Question about Prestige 660HW Wireless Router (PRESTIGE660HW)
...NAT SUA only (configuration done using WEB through 192.168.1.1) I get a report ethernet connection pass adsl synchro pass test adsl(ATM OAM) loop back test fail (so also PPP/PPPoE server condition ...
...NAT Authentication PAP (UPAP) • CHAP Modem DSL Standards ADSL Lite (G.Lite ITU G.992.2) • ADSL Full Rate (G.DMT ITU G.992.1) Other Features LED Indicators Power • WAN • Activity • DSL Additional ...
Usually answered in minutes!