Questions & Answers for: nad amp protection powering

...NAD amps. a 2200PE power amp, a 7400 receiver, a 5150 integrated amp, and a 2600 monitor series power amp. They all, with the exception of the 5150 which doesn't seem to have relays, have had the ...

Nad C350 2 channel Amp continually in protection mode Nad C350 2 channel Amp continually powers up into protection mode only. Is this something like the C370 amp with dried out capacitors on the ...

NAD C370 Right channel distortion Hi, bought this amp as new old stock last week. Worked fine for a few days. After leaving switched on unused for 3 or 4 days I noticed the protection light was red. ...

NAD C270 amp won't switch from red power/protection to green. I heard a pop and then the amp did not work. I removed fuse. OK for fuse replacement because purple capacitors (per your previous NAD C370

...nad-c370-protection-circuit-repair-amp-fails-goes-into-protection-mode/ If you didn't fix the amp, I'll buy the remote from you What do you think? Check that the +46/-46 voltage from power ...

...NAD 3150, its not working, all the indicator lights ( power, protection and soft clipping glows) HI... It's either failed power supply capacitors or one or more power transistors in the output amp ...

...NAD more breathing room, I noticed the power cable that plugs into the back of the amp felt a bit loose. Even after pushing the power cable in as much as it would go, it still felt a bit loose. So I ...

NAD T752 Hi, When powering up, about 4 second after, the amp turn in protection mode. Nothing is connected to the anp and it is clean from any metal dust. I found one transistor to be very hot. It's ...

NAD M3 power light turns red immediately and PROTECT message displays. Amp keeps functioning but volume control doesn't work up or down. Before this happened, the volume control dial worked ...

...amp which seems to have gone on both channels together, without any warning. Any ideas? https://elektrotanya.com/nad_c370_sm.pdf/download.html ...