Questions & Answers for: cb amp swing

...cb sam website. good luck Ed NC Electronic Mills, Wyoming This is no solution but rather a suggestion,I bought a PC68XL from a for 68.00 total with a mosfet swing kit installed,I was able to contact ...

...amp . Make sure that R48 is 220K Ohm . For swing, remove Jumper JP36, and install a 18 ohm to 100 ohm 1 watt resistor(higher number = lower dead key) in parallel with a 47uf to 100uf 50v cap . I use ...

...swing to about 27 watts, and kick an amp in the pants. I run a cobra 29 in my blazer with a dave made 5 pill, and I key on 6 pills and I near keyed on a 2x8. very close. All that I have done to the ...

amp. enjoy !!!!!! ...hope this was very helpful.... I have several linear/amps/kickers and my best is the Demco Demon 500 Plus that swings 1500 watts on the A.M. side. NEVER KEY UP MORE THAN 2 WATTS!!

hello i own a cobra 29 ltd classic from 1993 today i was talkin skip like crazy!! running about 100 watts out of a texas star modulator!! i left for a while came back talked for a while everything was

...amp is turned on . Not even a SWR reading will appear when amps turned on but when Its turned off all 3 meters work fine. I have been putting in 1 or 2 watts and swing to 12 or so but no signal. I ...