IGMP Multicast Option Check Enable WAN Service Option Enter the Service Name as Dataone 10. Click Next and Save. You should also save and reboot your modem. If doing the above does not works, check if
...multicast routing-enable <---- global command pim <---- global command on the vlan interfaces: interface Vlan-interfacex ip address ***.***.***.*** ***.***.***.*** igmp enable pim dm Those ...
Question about WNDR3400 N600 Wireless Dual Band Router (WNDR3400100NAS)
...Isolation This step will disable AP Isolation. Uncheck Disable IGMP Proxying This step will turn Multicasting ON. An enabled isolation block communication between devices on the network. So if
Question about TL-WR740N 150Mbps Wireless Lite N Router IEEE 802.11n IEEE 802.11g IEEE 802.11b Built-in 4-p... (813120016543)
...to network but no internet. there is no IGMP option for Enable/disable. where I found it for multicasting through Chromecast. Try updating the firmware of the router. Here's the link
Question about TL-WR740N 150Mbps Wireless Lite N Router IEEE 802.11n IEEE 802.11g IEEE 802.11b Built-in 4-p... (813120016543)
...multicast protocols" (for example, IGMP, PIM, etc.). What is your goal? Depending on that you may need to discover your options. Good luck, Michael Shavrov / Cisco CCNP, CCDP, CCSP, CCSP ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions
