Questions & Answers for: Jl Audio mtx subwoofer

wiring i have 2 12"jl w3-d6 & 2 mtx 250 4 ohms each so how do i hook up each amp to each speaker and recieve max power without blowing or burning any of it Run a Jumper from coil 1 + to coil 2 + and a

Blown subwoofer I did check with multimeter and there is no continuity and no ohm rating. Is there any way to repair this subwoofer or repair instructions? Please help! "Is there any way to repair ...

...to your amp making the final load 2 ohms, the best "match" for your amp. BEST solution,,,,,,,,,, MTX 9500    next ...

very little sound i have a 12w7 to a 1000/1 with an extra battery and there is only a little bit of sound comming out of the sub iv checked all of the connections and it just is not working PLEASE ...

No response from subwoofer despite power. I have the amp and subwoofer all wired in and the amp is receiving power but the woofer does not play. How is the sub wired? Are the gains up? Have you ...

jl audio w7 13 subwoofer system 3ohm driver bridge it 2 ch amp i would like to know if you can bridge the w7 13 subwoofer to a 1500 2 channel amp. can i get instructions and configurations. How much ...

im not sure if its my amp or my subwoofer but it will cut out when i play differnt songs and it i can turn it all the ways up on one radio station but i try another at that level and it will cut out ...

i want to know at what frequency to run this subwoofer Depends on what kind of music you like, however I wouldn't go too much above 100 Hz. I have one of these and I run my sub channel from my deck at

need correct size subwoofer box,each speaker requires 3 cubic fee need to know if my subwoofer box is the right cubic feet for [2]13.5 jl w7 subwoofers. measurements are48 inches by 18 inches by 14 ...

...a 15 hcca but dont know what amp to get try getting an amp to match the RMS i would say maybe mtx rockford or hifonics becuse they have true wattage an will give u the peak an rms of what ever ...