...for the headlight switch and the diagram for the connector to the switch? I hope this diagram works...I'm not great with MS Paint. Thanks for that well drawn diagram!! Helped me out big time
I have a 1994 Ford Ranger (white) in color with its original clear coat remaining. What is the best way to remove this clear coat? How much of the paint must be removed before I can prime and repaint ...
Does ford treat the under carriage metal for rust prevention ? I have an 08 ranger. Thanks, Jim ford coats the undercarriage with a red paint which acts as a anti rust shield the paint is covered by ...
How to remover the distrbutor with out getting it How to remove the distrbutor with out getting it out of time Onced the distributor is removed it will be out of time for its not there no longer. I ...
I have a rusted roof on my ford ranger. Should I fix it with fiberglass or bondo? IF it's surface rust you should sand down to bare metal, prime then paint. If it's holes and you don't want to weld in
what color is r146 on a 1987 ford ranger All of the 1987 Ford Truck paint codes that I could find start with the letter M, followed by 4 digits. Where did you get the number r146?
Question about 2003 Ranger Regular Cab
How do you remove the clutch master cylinder on a 2003 ford ranger First drain oil at slave cylinder, then remove pipe from master cylinder . disconnect clutch pedal push rod from cylinder , remove ...
location for paint code ford ranger 93 unde the ood o a metal tag
How do I set timing on 3.0 L engine? mark the balancer with a white paint marker on the TDC groove, there is a small plug over on the d/side inner fender has a small "dummy" plug plugged into it ...
Question about 1998 Ranger SuperCab
98 Ford Ranger 4x4. shift arm has locked up. What does this mean? It has been parked for two days in an icy driveway. There was nothing wrong with it when I parked. Could it actually be frozen? Yes it
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions