Questions & Answers for: Husqvarna mower keeps blowing fuse

mower keeps blowing the 20 amp fuse that is on the red circuit going to the ignition switch. If I put a new fuse in and turn on only the head lights the fuse will blow just by steeping on to the mower

...keeps blowing fuses as soon as one is changed and you attempt to turn it over the fuse blows You have a dead short in the circuit for that fuse. Check for a pinched wire, or a wire rubbed thru a ...

...mower keep blowing the 20 amp fuse My 25 hp zero turn Husqvarna Model number ZTH-6125 keeps blowing the 20 amp fuse. To start with, when I moved forward, after about 20 seconds the fuse would blow. ...

husqvana keeps blowing fuse & when i disconnect a wire from the fuel managment system it doesnt blow look at the solenoid on the carb the wire starts to break and short out on the solenoid housing

...keeps blowing the fuse. It starts, runs for a few seconds then blows. I have done the obvious like checking for shorts, loose connections etc but cant find anything. Any help would be greatly ...

...mower starts but it keeps blowing the fuse when I engage the blades check for a area of the wire insulation that has been wore off against the frame or body of the mower. sounds like a electrical ...

husqvarna problems keeps blowing fuse You have a short,you'll need to find it ! Bare wire,terminal end hitting metal .

I put my battery in backwards my Husqvarna mower now I keep blowing the main 20 amp fuse. PUT IT IN AND CONNECT IT THE RIGHT WAY!!

keep blowing fuse fuse blowing is a result of excessive current draw from a dead short or failed electronic component look for damaged wires or solenoids that are not working

...KEEPS BLOWING FUSE WHEN I TRY TO START MOWER. WHY? Could be loose connections on the battaery or the earth wire loose against the frame, auto deco valve not. working in the engine causeing over ...