Questions & Answers for: move mitsubishi tv model vs

Mitsubishi VS-70705 loses picture but has sound When I first turn the tv on the picture comes on for a few seconds then the screen goes to green but I still have perfect sound when i turn on my tv the

...move it in one piece is near impossible unless you have some NFL players handy to help. I found the problem. Mitsubishi put 2 strips of what looks like rubber caulking inside, presumably to keep the ...

Mitsubishi VS-50705 convergence problem. I have the service manual so I can get the part numbers and resistor information. What I'm looking for is which of all those resistors are the known ones to go

...TV Is it ok to use Nintendo Wii with this set? Actually, I am not sure about the model number. Our manual shows several model numbers VS-50605 VS 50705 VS55705 VS 60705 VS 70705. Wii instructions say ...

...mitsubishi 60 tv model number vs 60609 when My mitsubishi 60 tv, model number vs 60609, when turned on only shows a picture for a couple of seconds and then goes to static, Can you tell me how to fix ...

Have VS 70705 Projetion TV 9yrs.new horizontal lines When we first turn on tv we have squiggly horizontal lines that go away after 10 minutes or so after it warms up. has squiggly line on top

...Mitsubishi VS-70705. What causes the image on the screen to jitter horizontally? It seems to get worst as the TV warms up. Sounds like bad convergence ICs. They are complicated to replace but a good ...

Trying seperate the base from the top for moving they do not seperate because the base is where the color guns are located so that is why you cannot remove it.

Static. cannot get picture without lines and staic If you haven't already try setting the convergence board, another thing that can cause that is old electrolyte in your picture tubes. Before you ...

can i hook up roku to my mitsubishi vs 70705? If it has a HDMI input you can