Questions & Answers for: Eureka motor surges

Power surge issue After the Eureka 4467 runs for a few minutes a power surge occurs. The vacuum motor slows down and any lights in the house are dimmed. Is there a fuse or something that I can change?

brush motor failure My Eureka OPtima 426 brush motor failed. When you hit the reset it turns sparks and stops. the electric motor is a sealed motor.DF 651 (2) lg120 Johnson CL.A I.D. 50202500020c. Can

power head motor is good,runs great from test cord switch seems to work. brush roll cleaned but power head motor will not run If you have checked the power delivery down to the powerhead and you have ...

Eureka Wide Track Superlite Vacuum The roller brush motor died. If I bought another motor and spliced it to the existing wires, would this fix the problem? Is this do-able? Where can I buy another ...

Eureka Wide Track Superlite vacuum roller brush motor The vacuum is Model #409. The roller brush motor died. Is it possible to splice a new motor to the existing wires? Do you know where can I buy a ...

the dealer told me my problem is its over heating how to open the back of eurka 4496 to get to the motor / I had it for 2 yrs and no problems but because of time it needs to be cleaned (motor) I need ...

...it will spin once and then struggles to spin again. I have checked the belts and it seems the motor is not turning the belt/brushroll. The motor knob, lever is extremely hot How can I tell if ...

I have a Eureka Boss Model 411... I need to know where the reset button is for the suction motor. The canister was clogged on the backside, I didn't see it and the suction motor shut off. I have ...

No suction. dirt goes into the filter instead of the canister Check the motor and clean it properly. A very dirt motor will cause no suction or weak suction. Be sure the motor is running on proper ...

eureka 4381 when switch is on lite works, but motor doesn't start Found vacuum inlet hose to be plugged and cleaned all parts of vacuum. Don't know if motor has a thermal safety breaker or if motor ...