The wind shield wipers worked for a few days on and off. Now they dony work at all. ?? It's probably the wiper motors that you'll need to replace.
...shield wiper that does not work, here's what you need to check: 1. First the fuse. 2. Wiring. 3. Switch 4. Last, is the motor. Thank you! This problem is most likely caused by a blown fuse in the ...
...shield it just stops in the middle but you can still hear the motor running Under the bottom of the outside windshield you will see a grate with slots that let you look down inside. One of the arms ...
shield wiper motor back in the wind shield wiper stops in the middle of the wind shield this is normally caused by a bad wiper motor or binding of the wiper gears and linkage arms. check to see if the
...shield off, you need to secure the window. Take some masking tape and put some long strips that attach to the outside of the window, wrap around the top of the door frame and attach to the inside of ...
shield design on the front valve cover. You will have to go to Ford (yes, the dealership. Unfortunately the updated parts only come directly from Ford). You will need a lower intake plenum, the gasket
...cuts off and on by itself when the moter is running,but stays on and works fine when i turn the motor off. radiation from ignition is effectn the radio--got to get it shielded--or the vibration ...
Usually answered in minutes!
1,830 Questions
1,838 Questions
1,503 Questions
1,212 Questions
1,032 Questions