Remove the rear wiper motor shaft nut cover. Remove the rear wiper motor shaft nut. Remove the rear wiper motor cover. Remove the rear wiper motor bracket nut. Remove the bolt and the rear wiper motor
shaft bearing. Pull out axle. Remove alternator and bracket. Here is the tricky part: the alternator comes out through the hole where the axle was. I found that jacking the front of the motor up helps
shaft - $1200 with taxes and labour. I already replaced the alternator in 2007 - that was over $800 because of where it is positioned. Takes hours and hours to get at it because it is buried under the
...motor shaft nut cover Remove the rear wiper motor shaft nut. Open the lift gate window. Remove the rear wiper motor cover trim panel. Disconnect the electrical connector. Remove the 2 rear window ...
motor mount was broke You will have to under to inspect. Check the front engine mounts although it is not like that these will be fault. Now check the mount under the transmission housing, the rubbers
...shaft or there is an internal problem with the linkage between the wiper and the motor. Wire would have nothing to do with your problem. If the wiper fell off of the shaft, there is a bolt or screw ...
Usually answered in minutes!
1,139 Questions
1,083 Questions
1,107 Questions
900 Questions
559 Questions