Questions & Answers for: motor shaft

Ad

Question about Dryers

2 Answers

...motor shaft loose. i am trying to turn the shaft in the clockwise direction and with an adjustable holding the rear shaft, (which on my unit is plastic) and the plastic cover on the rear of the shaft ...

Ad

Question about Rooftop RV Air Conditioner

1 Answer

...motor shaft. Thanks Rick     Here is what we do:    If possible, we take the whole thing out; motor and fan blades together. Then we sand down the exposed part of the shaft. ...

Ad

Question about BBQ070 All-in-One Grill / Smoker

2 Answers

...motor shaft.Try spinning the auger shaft over the motor shaft. The auger shaft should spin freely over the motor shaft without binding.If the auger binds, loosen the 7/16th inch bolts on the motor ...

Question about Aloha Breeze Fan

2 Answers

...motor shaft,#7. the motor (3 screws, small),#8. the top half of the motor (4 large screws)#9. found black, dry hard carbon residue in the bottom motor bearing#10. rinsed with 5w-30, Mobil One ...

Question about 1.5hp Pool Pump Motor Motor A O Smith Electric Pool Motor for 56j Frame Motors Ust1152

1 Answer

...shaft seal? open & dismantle pump from motor. Some will have thru bolt motors all the way thru the motor, heads of bolts are (4 each) visible & accessible at back of motor. Loosen these & ...

Question about 011523 WhisperFlo High Performance Pump WFDS8 230 Volt 11040 Amp 2 Horsepower

1 Answer

motor and you can use whatever tool required to keep the shaft from spinning. Once you are able to lock the shaft, you can read the impeller... Note* some styles will have a screw in the middle of the

Question about BBQ070 All-in-One Grill / Smoker

1 Answer

...motor shaft.Try spinning the auger shaft over the motor shaft. The auger shaft should spin freely over the motor shaft without binding.If the auger binds, loosen the 7/16th inch bolts on the motor ...

Question about BBQ070 All-in-One Grill / Smoker

1 Answer

...motor shaft. Try spinning the auger shaft over the motor shaft. The auger shaft should spin freely over the motor shaft without binding. If the auger binds, loosen the 7/16th inch bolts on the motor ...

...motor shaft. Try spinning the auger shaft over the motor shaft. The auger shaft should spin freely over the motor shaft without binding. If the auger binds, loosen the 7/16th inch bolts on the motor ...

Question about Original Steam Free Milk Frother with Stand

1 Answer

...motor shaft. I used needle nose pliers to pry whisk shaft away from motor shaft and it separated easily. Ordered D.C. Motor from china on ebay. 21 mm diameter case. 2mm shaft width. Motor was .99 ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19166 Answers

David Shaub

Level 3 Expert

2994 Answers

Are you a Dryers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...