Questions & Answers for: Oldsmobile 88 motor mount diagram

motor mount and you should be able to replace your water pump I just did mine, and you do need to support the engine and remove the mount, or atleast remove the half attached to body of car, and slide

86 corvette fan works only on high i found the blower motor resistor mounted on the heater box, mine looked , got a new one anyway and it still only works on high fan switch, you would have to replace

...motor mount that should have a single bolt and spacer to remove to switch and replace the belt, but I don't know which bolt/ or bolts to remove. i actually just bought the same car. there is a spacer ...

...oil pan The motor mount does not need to come off,there is a bracket associated with this mount that unbolts to allow access to remove the belt. you do not have to jack the engine or remove the

...they had more time and more help to work on it. How big a job is this? the motor mount needs to be removed to replace the belt. so, if you've never removed a motor mount, I would let them handle

...motor mount on 1997 olds delta 88 to replace serpentine belt. remove the mount from it. The lower mounts will keep the engine in place. The upper mount is a stablelizer to keep the engine in check ...

...motor mount to change serpentine belt have removed nut not sure how to remove torx stud U have to remove the motor mount bracket, there is a stud and a spacer towards the bottom that when removed you ...

...diagram of the serpentine belt under the hood somewhere. May be on the underside of the hood or on the radiator mount. Also can be found in your owner's manual. If the belt came of you need to find ...

...motor mount is in the way blocking access to the water pump? The motor is a 3800 V6. Lift motor by loosening motor mount to access Hey Wanda,i did look it up on line there is a lot to it but nothing ...

how many motor mount do a 1994 oldsmoilbe 88 have Note the picture. I consider the transaxle mounts part of it.