Questions & Answers for: Buick motor mount diagram

...motor mount. The belt runs through the middle. The lower mount is a light brace; it doesn't seem to really support much. The mount is a spacer tube a couple inches long. It's held in place by a stud. ...

Ad

Question about 1997 Park Avenue

1 Answer

...motor mount. You must then use a breaker bar with a socket (13/64") and pull it toward the front of the car to release the belt tensioner. Put the new belt on, tighten it, put the mount back on, and ...

Ad

Question about 1995 LeSabre

1 Answer

...motor mount. On some makes there is a motor mount that is attached to the sidewall of the vehicle and this mount must be removed to remove and reinstall the belt, otherwise, yes it is that simple. ...

Question about 1997 Park Avenue

4 Answers

...It has 3 transmission mount I also have a 97 buick park avenue I have also replaced my 1998 motor mount with one from Amazon. I went to a junk yard and they were all broke so it is a common

...motor mount I have a new serp belt and I have been told that I do not need to remove the motor mount the car is a 1996 buick LeSabre with a 3800 K ( L36 )series motor. Is there a way to get the belt ...

...motor mount I have a new serp belt and I have been told that I do not need to remove the motor mount the car is a 1996 buick LeSabre with a 3800 K ( L36 )series motor. Is there a way to get the belt ...

and then remove the motor mount on the passenger side to be able to get the pump out.You will have to jack the motor in order to get the long bolts out of the waterpump and motor to engine mount bolts

Question about 1996 LeSabre

1 Answer

motor mount to get the belt off? Is there an easier way of doing this or is that the only sollution? yes.that is the only way.You have to unbolt the motor mount. To replace the serpentine belt on a V6

...motor mount loosened, I don't have to drop the engine do I? i can't get the serpentine belt off of my 1999 buick park ave to replace the water pump. I have the motor mount loosened, I ...

motor mount assembly when installing belts. The outstanding question is: Is there a trick to installing the torque axis motor mount assembly AFTER both belts are installed, or does the inner belt have

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Buick LeSabre
2000 Buick LeSabre

1,731 Questions

1997 Buick LeSabre
1997 Buick LeSabre

1,603 Questions

1995 Buick LeSabre
1995 Buick LeSabre

1,084 Questions

2002 Buick Rendezvous
2002 Buick Rendezvous

1,091 Questions

1994 Buick LeSabre
1994 Buick LeSabre

904 Questions

Top Buick Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...