Questions & Answers for: GMC Yukon XL 6 l motor

Question about 2003 Yukon XL

1 Answer

stepper motors how did you remove stepper motors and can you just swap them becaulse they are the same good day, hope this link below will solve your problem. motors

Ad

Question about 2002 Yukon XL

1 Answer

2002 gmc yukon wipers wipers will not set in correct position after i changed the wiper motor Hi, you need to remove the linkage from the wiper motor, turn the wipers on, wait for the motor to cycle ...

Ad

Question about 2000 Yukon XL

1 Answer

rear a/c not working does rear motor blow? if not pull motor and check wire hook up for burned places and check motor with 12 volts,,,, if bolwer is blowing and its not cool then check ac charge it ...

how to replace the blower motor fan assembly in a 2000 GMC Yukon XL K1500 4X4 Blower Motor Removal & Installation Delphi Blower Motor Replacement (Delphi) To Remove: Remove the instrument panel ...

Question about 2002 Yukon XL

1 Answer

no front blower motor operation. i have heat coming out but no blower you probably need a new motor the motor is located under the passenger side dash with a plastic cover over it remove the cover and

...electric window will not roll back up is there a part I can buy to fix it? Driver's side window motors get used far more than any other window motor on the truck. They frequently burn out. It is ...

need to put new window motor on gmc yukon need to put new window motor on gmc yukon Remove door panel to get at it. Motor may be good and regulator or other issues need attention. Open it up and check

...is not working what is wrong, blower or relay, all fuses are ok. CHECK SEE IF POWER GOING TO BLOWER MOTOR.IF YES BLOWER MOTOR COULD BE BAD OR HAVE HAVE A POOR GROUND.IF NO POWER GOING TO BLOWER MOTOR ...

Question about 2002 Yukon XL

1 Answer

motor will not start motor will turn over but will not start Either your not getting spark or your not getting fuel to the motor.

...needle of digital display. If it doesn't move then your switch is bad. If it does move, unplug the motor connector and check the voltage there too. If there is voltage and the motor isn't working, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...