Questions & Answers for: Samsung SyncMaster mosfets

Question about SyncMaster 153V 15" Flat Panel LCD Monitor

2 Answers

only have a black screen Samsung SyncMaster 153V power supply is ok have a green light was working fine but just went black It is either the Inverter board inside or the ccfl is faulty. Don't waste ...

Ad

Question about SyncMaster 740N 17" LCD Monitor

3 Answers

...If an image turns off like that, but LED at front stays on, then most likely you need to replace MOSFETs in the inverter. Open the monitor and take metal lid off, take inverter board off the ...

Ad

Question about SyncMaster 213T 21.3" LCD Monitor

2 Answers

Power light is on, but there is no display You need to open it up first and look for bad caps (bulging top) in the power supply first then report back to what you see so we can guide you further, see ...

Question about SyncMaster 216BW Monitor

1 Answer

lcd monitor flickers Check the pc resolution first then your video cards and try new vga cables. If nothing happen the monitors has internal problem may be the mosfet IC of inverter area is shorted. ...

Question about SyncMaster 204B (Silver, Black) 20.1 inch LCD Monitor

1 Answer

...could be the problem ? Thanks With certain Samsung models, not only do the capacitors go, but the MOSFETS will go as well, possibly a fuse. The MOSFETs are the big bulky black things with a silver ...

Question about SyncMaster 920NW Monitor

1 Answer

lcd monitor automatic on off There are 4 bad capacitors involved. It may not seem bulging but one or two are leaking. These are the 4 capacitors. 2 pcs. 470 microfarads - 25v 1 pc 1000 microfarads - ...

Question about SyncMaster 510N (Silver) 15 inch LCD Monitor

1 Answer

i am dealer for samsung lcd and all part of samsung my problem samsung 510n lcd is dead and mosfet is burned plz give me a mosfet number There are more than on chassis verison for this model. Service ...

sir I have a DELL desktop CRT monitor which model no is E772p.It is not working .I opened the monitor and checked. I found that switching mosfet was short in power supply.It was taken out from the ...

Question about SyncMaster 2333SW 23" LCD Monitor

2 Answers

Syncmaster 2333sw My monitor will not turn on. The monitor will not power up. power supply board failure, check for blown fuse.before you replaced the fuse you need to check up with other component ...

My SyncMaster920wm monitor will not stay on . It keeps shutting off after I press the on and off switch Samsung Is a protection mode! When it have this kind of error is a problem of the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...