...console, and while trying to operate channels 13/14 and 15/16 (these are both stereo channels with mono capabilities, and do not have XLR inputs) I only get sound from the left side. I have used ...
mono On the original TV remote press the "AUDIO" button until it gets to the option "MAIN" and this should get the stereo sound back. Good luck... I have a mfgr magnavax mod 3onf251 and I can't get it
...you have a universal remote,you will probably have to do it with the buttons on the TV.SAP and stereo are about the same.It most likely cycles through mono,stereo,SAP with the volume button.Good
...Mono/Stereo push button. What position should the button be in to listen to a stereo broadcast? [email protected] I can't find the manual or a good picture of the front panel but I'll chime in ...
...mono button is pressed. Mono sounds fine but is not stereo. When in stereo FM it sometimes flashes back and fore to mono or becomes silent. The CD player works fine. I understand there is no charge ...
...mono. If you press "0" [Zero] button, you can reset the sound settings to it Factory settings. To select 'Streo mode; 1. Press "Menu" button. 2. Press UP or DOWN button to select MTS [Multi-channel ...
...on the remote. It should switch between the Hi-Fi stereo track and the mono track. I believe the main unit does not have such a button, so you can achieve this only by operating the remote
button you have to press, and are they pared, good look The bluetooth set is a mono bluetooth so unless ur phone set could play music in mono bluetooth mode u cant hear music ( call =mono only music =
Question about HS-U770 S-VHS VCR
button on the front that says, "power amp routing". If the button is pushed in, the left will power mains in mono and the right will power the monitors in mono. Make sure this button is off for stereo
Question about X782E Laser Multifunction Printer - Color - Plain Paper Print - Desktop Copier/Printer/Scanner - 40 ppm Mono/33 ppm Color Print - 2400 x 600 dpi Print - 40 cpm Mono Copy - 600 dpi Optical Scan - Automatic Duplex Print - 1600 sheets Input - Fast
how to get in to service mode on a lexmark x782e mfp Diagnostics mode: power off unit. hold the 3 and 6 buttons and power on, holding the buttons for 10 seconds Configuration mode: same as above but ...
Usually answered in minutes!
297 Questions
192 Questions
155 Questions
161 Questions
136 Questions