...BIOS turnoff the computer and plug the monitor into you vga card. That should do it. To change it back to your motherboards vga just reverse the instructions. Let me know what happens. Good Luck, ...
Question about E172FP 17" LCD Flat Panel Monitor
...monitor is faulty and must be repaired). Assuming it worked, plug it again and turn it on. After half a minute or so, turn the computer on. You should be able to see at least the BIOS POST screen: if ...
turns on and off My Gateway HD2201 is connected to my laptop via vga. The monitor just started turning off and on about ever 5 seconds consistantly. I have checked the plugs for the vga and power cord
...1. Check the VGA signal cable. Unplug and plug back. 2. Use another available monitor to test. It may be the LCD faulty or VGA card faulty. 3. another way, plug to your notebook and turn on to
to red, white, and yellow cable) when i hooked everything up and turned the monitor, it said cable not connected I believe VGA converters require power. Is the VGA converter plugged in, and powered on
...VGA cable to the tv monitor and PC you need 3 vga connector and 1 splitter to connect a dual monitor system. connect one end of the vga connector to the pc unit and the other end to the input port of ...
VGA (CRT) monitor, plug it's VGA cable into the VGA port on the graphics card. (Computer off, monitors off) If both of your monitors have a VGA cable you'll need an adapter. Same thing if both
monitor, (Still using Yahoo as an example), go to the RIGHT side. See the blue frame going around the screen?When you bring the mouse cursor ON the blue frame, it turns into a Double-Sided arrow.It is
Question about AL1706AB LCD Monitor
...VGA monitor, to the VGA port on the laptop, (Left towards the rear), and see if the laptop is working, but the problem is the Video Cable, or inside the Display Assembly. (Sorry about the run-on ...
Question about 22" X223w LCD Monitor
...VGA monitor outputs from each computer into the inputs on the back of the KVM switch. Tighten the retaining screws down for each connected VGA cable on the computers and the KVM switch. Step 4 Plug ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions