Questions & Answers for: module repair miele

...repair quote came to about $1000CDN after the machine was taken to the shop.) My professional training in reliability of electronic components led me to argue that an electronic control module should ...

module, and asked $800 for this ( waived finally). Claimed that the problem was caused by power transformer. This transformer was necessary, because it was 220 V demo model. Capacity of trafo is 4000W

the Miele metalwork on top) and made sure the fan does not work automatically when a drying cycle is selected. The most expensive repair is the eectronic module which costs £175 plus £99 Miele callout

...module assembly. You will need full model and index number before ordering part. We have had fault F53 (and occasional shaking by the machine) over some years on our Miele W1714 washing machine and ...

...program module and then the executing device be it the valve or motor or pump. Please check the link below: ...

...module and then the executing device be it the valve or motor or pump. Please check the link below: http://www.repairclinic.com/Washing-Machine-Troubleshooting?red=Washing-Machine-Repair-Help Thank ...

...module and then the executing device be it the valve or motor or pump. Please check the link below: http://www.repairclinic.com/Washing-Machine-Troubleshooting?red=Washing-Machine-Repair-Help Thank ...

...model of your Miele washing machine and works for all modules that start with: EDRU, EDSU, EDSTU, EL, ELP, EDPL, you may visit youfixit.eu for a solution. Miele repair Address and payment ...

miele 862 when using it made a bang and a bit of smoke out of wire panel heat plate is stuck down still getting power to it but wont roll checked all wires cant see any damage It sounds like the motor

...repair:vacuum-speed-controller and referring to this post on Fixya https://www.fixya.com/support/t2447048-miele_s571_vacuum_cleaner_power_surges I just repaired the same problem. It is not the motor. ...