Questions & Answers for: modem power ds lights

...modem), and the power cycles (pulling the power plug) to no avail... I figured out that with the RCA modems, if you pull them off the network ( disconnect the cable) , do a system reset (push the ...

...modem has a reset button hit it hard for 30sec power cycle ( unpulg the power cord ) wait for 1 min plug it back again, let all lights come back restart ur pc then connect... it will be up and ...

...power button lights up but the screen stays blank. You either have liquid damage or bad lcds. Hi If the green light is on but the system does not boot up it may be a problem with the wireless modem ...

...modem stops working when it sense a power outage. This is the defense mechanism of these devices to avoid from being damaged. Turn off the computer, router and modem. Leave them off for 15 minutes. ...

...something only a tech could fix. but if it does lock up and go solid ....hook up your router , power it up and give it a minute to sense the modem, restart the computer and you should be good to

only lights on are ds and power. internet wont work. Have you connected your cable or DSL provider to make sure its online. An that the mac ID is registered with your ISP?

...modem is through insight and it works some times but it will cut off the phone and internet and I try to reset it and it only has solid lights on the power and ds and the US light blinks how do I fix ...

...power to modem then wait one minute before applying power to wireless router. 3. Ensure you have green lights across both devices, specifically, the recieved and sent lights. These same lights will ...

...power to modem then wait one minute before applying power to wireless router. 3. Ensure you have green lights across both devices, specifically, the recieved and sent lights. These same lights will ...

...modem does this the top 2 lights which top light is power of course , and that light stays on solid the light below is DS, and that light stays on solid and the light below that is US that light ...