Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
noise on left side of bike,maybe primary thees 2 adjustments - one on the cable, one in the primary.... stand the bike upright and remove the derby cover. Looseen the jam not on the cable adjuestment
...According to what my parts book shows, there was not a different mainshaft for the belt drive. All models used the same mainshaft from 1970 to late 1984. Harley offered a kit, 35039-80, that ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
...excellent question 95% of all tourquing can be handled by a 3/8" drive 0-75 ft lb. model. 4% by a 1/4" drive 0-120 inch pound model. 1% by a 1/2" or 3/4" drive model. Good luck and have nice
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
how to check oil level on 2004 dyna harley Hi Anonymous, the engine oil dipstick on later models unscrews, on earlier models it just pulls out with moderate force, on Softail and Sportster models the ...
...ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator. 10. With volt meter set on ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
were is the oil dip stick on a 2004 dyna wide glide Hi Anonymous, the engine oil dipstick on later models unscrews, on earlier models it just pulls out with moderate force, on Softail and Sportster ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
how many quarts of oil does a 2004 harley wideglide hold? Hi Anonymous, oil capacities on Dyna models: 1. Engine oil 3 qts. with filter Hd Multi Grade 20w50. 2. Transmission oil 20-24 oz HD ...
...ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator. 10. With volt meter set on ...
Question about 2005 FXDWG - FXDWGI Dyna Wide Glide
...no charge please feel free to contact me at [email protected]. ...
Question about 2004 FXDWG - FXDWGI Dyna Wide Glide
...ohm meter, both leads touching alternator pins meter should read 0.1 to 0.2 ohms on 1989 and later models. 0.2 to 0.4 ohms 1988 and earlier models, if not replace stator. 10. With volt meter set on ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions