Question about Officejet 7210 All-In-One InkJet Printer
...mm (4 x 6 inches) 127 x 178 mm (5 by 7 inches) Letter: 216 x279 mm (8.5 by 11 inches) A4: 210 x 297 mm (8.27 by 11.7 inches) LabelsLetter: 216 x 279 mm (8.5 x 11 inches) A4: 210 x 297 mm Custom76 x ...
...mm (51.6 inches) Overall Width827 mm (32.6 inches) Overall length2129 mm (83.8 inches) Seat height991 mm (39 inches) Wheelbase1438 mm (56.6 inches) Fuel capacity - reserve8 l (2.1 gallon US) - 0.9 l ...
...mm (1.48 inches) Toner/primary charging roller 37.7 mm (1.48 inches) Heating element 56.5 mm (2.22 inches) Transfer roller 45.2 mm (1.78 inches) Pressure roller 62.8 mm (2.47 inches) Toner/drum 75.4 ...
...mm (1.05 inches) Charge roller 32.9 mm (1.3 inches) RS roller 37.7 mm (1.48 inches) Transfer roller 54.5 mm (2.15 inches) ETB rollers 56.6 mm (2.22 inches) Fuser sleeve 62.8 mm (2.47 inches) Pressure ...
Question about WorkCentre Pro 416SI All-In-One Laser Printer
mm / 21 inches Depth: 577 mm / 23 inches Height: 1039 mm / 41 inches Recommended clearances: (for ventilation, ease of use, access to features) Front: 915 mm / 36 inches Right Side: 700 mm / 28 inches
mm; (4 x 6 inches) Photo paper 127 x 178 mm; (5 x 7 inches) Photo paper 203 x 254 mm; (8 x 10 inches) Photo paper 254 x 381 mm; (10 x 15 cm) Photo L 89 x 127 mm; (3.5 x 5 inches) 2L 178 x 127 mm; (7.0
...mm (1.05 inches) Charge roller (Print Cartridge) 32.9 mm (1.3 inches) RS roller 37.7 mm (1.48 inches) Transfer roller (ETB) 54.5 mm (2.15 inches) ETB rollers (ETB) 56.6 mm (2.22 inches) Fuser sleeve ...
...Item Specification Displacement L (CID) 4.6 (281) Number of Cylinders 8 Bore and Stroke mm 90.2 x 90.0 Firing Order 1-3-7-2-6-5-4-8 Oil Pressure (HOT @ 1500 rpm) kPa 138-310 Drive Belt ...
mm (11.8 inches) Rear suspension travel: 315 mm (12.4 inches) Front tyre dimensions: 80/100-21 Rear tyre dimensions: 110/90-19 Front brakes: Single disc Front brakes diameter: 250 mm (9.8 inches) Rear
...Rear Brakes JC5/JH5 Utility Only Rotor Discard Thickness* .............................. 28.50 mm (1.122 inch) Rotor Minimum Allowable Thickness After Refinish ....... 29.0 mm (1.142 inch) Rotor ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions