Questions & Answers for: Canon mm to inch

...digital SLR cameras take pictures with an aspect ratio of 2 to 3. (This is based on the size of 35 mm film, where the images were 24 x 36 mm, a 2 to 3 ratio.) That is a different ratio than 8 x 10 ...

...inch (3 mm) thick. Observe where it meets the back of the scanner. Close the lid and stand the scanner on its front edge. You will see an oval patch slightly darker than the panel. Use a penknife to ...

...my canon ip4000 printer print onto and the answer is: standard paper: from a5 size (148.0 x 210.0 mm / 5.83 x 8.27 inches) to legal size* (215.9 x 355.6 mm / 8.5 x 14.0 inches) * legal-sized paper ...

...inch (approximately 3 mm) or you might damage the sensor. If the sensor does not move or does not spring back then the sensor is either obstructed or broken. Before I fixed the printer, the paper ...

inch / 6 mm. Soak bottom of print head. Do not touch or get wet the electrical contacts. Next while holding print head in left hand carefully pour a small amount of hot water in the each ink tank well

...a Canon EOS and want to buy a zoom lens to shoot birds, wildlife etc. I don't know how far80-200 MM shoots. I know it's sounds like a dumb ?'s - but I need to know. Thanks Nancy Multiply the mm by ...

...mm. If you can get some similar springs that are somewhat stronger, but under no circumstances more than twice as strong, replace the springs. If not, there is another way. Since the springs are much ...

mm (about 5/8 x 7/16 inch near the center.  Cut a piece of foil 15 x 10 mm, tape it on with ordinary cellophane tape (Scotch brand works well), and Bob's your uncle. Same here, on my MF4150D,

Issue: How do I set my printer so my printout fits the paper size I am using? Solution: Use the recommended Print Area MP240 Printing Area To ensure the best print quality, the machine allows a margin

... - Envelopes with an embossed or treated surface - Envelopes with a double flap - Envelopes whose gummed flaps are already moistened and adhesive Prepare envelopes. Press down on all four corners and ...