Questions & Answers for: Honda CR 125 R mixture screw

Question about 2005 CR 125 R

1 Answer

...mixture screw i have a cr 125 r 1997 with kehein carrbie need 2 no how to adjust the fuel mixture screww Begin by screwing the mixture screw in all the way until it stopps,,,but ONLY JUST ...

Ad

Question about 2005 CR 125 R

1 Answer

...mixture screw all the way out until its ready to almost fall out. Then it will start to try to open up but it still wont kick in good. I already had to replace the screw cause it fell out. I also ...

Ad

...mixture screw built-in. the idle is the knurled (usually gold) screw with the spring on it. and the mixture screw is the small one (usually gold too) set into the carb body. you'll know it because ...

...screw the mixture screw turn this in and unscrew it 1 turn out and try this i had this problem with my kx85 which i just blew the big end on so i cant race for a while get back to me if not ok also ...

Question about 2003 CR 125 R

1 Answer

...slow idling and then you just crank the throttle and it boggs down and if you hold the throttle it will die i have tried everything! tried this on the carb turn the mixture screw in a 1/4 of a ...

...mixture screw be set at? The mixture screw is used to get the transition from idle to throttle up smooth, and not to bog. Sounds like your jetting is to rich, or too big. Read your plug as it's ...

...mixture screw adjustment "ONLY" manages your idle and has no effect on any other circuit also any intake leaks must be repaired before the A/F adjustment procedure can be performed otherwise you will ...

Question about 2004 CR 125 R

1 Answer

...mixture" There is usually a simple screw with a spring around it on the carb to adjust it. With the engine running warm and idling, be sure that the choke is wide open, and turn that screw in ...

...screw needs to be backed off. 4. Air fuel mixture adjusted too lean start with 2 full turns. 5. Intake system air leak. 6. Fast idle choke ramp is not releasing. 7. Broken throttle return spring. 8. ...

Question about 2004 CR 125 R

0 Answer

...screw needs to be backed off. 4. Air fuel mixture adjusted too lean start with 2 full turns. 5. Intake system air leak. 6. Fast idle choke ramp is not releasing. 7. Broken throttle return spring. 8. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...