Question about KP2671 Professional 6 Series Stand Mixer
mixer. The paddle seems to scrape the bowl and creates a discoloration of cake ba?ter in the bottom of the bowl. Is this normal? Is there a fix? Is the problem with the paddle or the bowl? There is an
...mixer while it was mixing, and it jammed the paddle. I assume it stripped the gears because the motor still turns on, but the paddle no longer moves. Any suggestions? I think this link will help you ...
...mixer head has started to wobble while in use. I'm not sure when it began, but noticed that my moms does not and realized that mine does. I do not have a problem with the paddle hitting the bowl. I ...
mixer is four years old. I use it a few times a month. When you are able to remove the paddle, feel the opposite side of the spindle. It should be smooth. The pin should not stick out the back at all.
Question about KP2671 Professional 6 Series Stand Mixer
bowl is being scraped by paddle on stand mixer. how do i adjust it? There is a screw that turns about 180 degrees on the stand behind the bowl that fine-tunes the height of the paddle.
Question about KP2671 Professional 6 Series Stand Mixer
...mixer paddle is catching on the bottom of the bowl what can i do Tip the mixer up and look for a screw on the hinge underneath the top part. Turn this screw counterclockwise about 2 turns and the ...
mixer blade is chipping The white paddle attachment has chipped due to rubbing on the bottom of mixer bowl. Has anyone else experienced this? If it is a tilt head mixer then adjust the screw which can
...mixer paddle is rubbing the ... My 6 quart kitchenaid mixer paddle is rubbing the bottom of the bowl with the tip of the paddle and turning my product black Find the screw in the picture as shown and ...
paddle. Model number is K5SS and the mixer, while 35 years old is still working fine. The shaft on which the paddle attaches needs to be replaced. This can be found on Ebay and, among other places, at
Question about Kitchen Aid KSM150 Artisan 5 Quart Stand Mixer
...mixer is operating. I've tried adjusting the screw located under the head but it continues to wobble. Could I have bent or broken something? The screw under the head is for adjusting the head height ...
Usually answered in minutes!
493 Questions
357 Questions
285 Questions
205 Questions
183 Questions