Questions & Answers for: mitsubishi wd 65731 lamp reset

Red status light, ? color wheel. Intermittent problem. At power-up, can hear a soft high-pitched whine for several seconds .. one or two times. Usually,audio (only) will come on. Then steady red ...

Just put in a new bulb from dlplampsource.com and i'm still not getting anything and my lamp indicator light is flashing. tried reseting it and unplugged it and plugged it back in. Hi: Please feel ...

...Mitsubishi wd-65731). Watched it about ten hours. Turned it on Sunday night and after a few minutes it shut off and the lamp indicator light was red. Let it set for an hour; turned it on and it was ...

i forgot to reset the lamp hours back to zero after replacing lamp and a week later the red light is on again. Please Help! how to reset the samsung lcd projector,model:SP-250m lamp hours

...Mitsubishi Digital Electronics America, Inc (MDEA) 2006 DLP® Projection Televisions Models: WD-52631, WD-57731, WD-65731, WD-Y57, WD-Y65, WD-57732, WD- 65732, WD-57831, WD-65831. As part of our ...

...reset the lamp timer. Here is the procedure: Hold down the two arrow buttons and the Power button on the control panel at the same time for 3 seconds. The status indicator will blink twice. The timer ...

...The lamp replacement setting needs to be triggered in your system's menu, letting the TV know you changed the lamp. In the menu settings, advanced or other, you should find a bulb reset

...WD-65731 DLP HDTV. The tv will not turn on. Initially, it will power up, and you can here the fan running. The green "timer" light will blink for several seconds. Finally the fan will turn ...

TV keeps turning off. Red Lamp light but lamp is good. Reset brings it back on but turns off after 2 minutes. Sounds like the ballast might need replaced.

...mitsubishi wd-65831 RESET LAMP TIMER 1 Turn on the television after replacing your television's projection lamp with a new unit. If a dialog box displays on the screen asking you to reset the lamp ...