Mitsubishi Surround Sound M-VR800 When I turn on my reciever it automatically displays decoder on it and will not let me watch TV until it has sat on the decoder for like 10-15 min. I will push the ...
...Mitsubishi > VS XXXX this model is famous for fluid leaks. each projector tube has a reservoir on the front of it with a fluid in it. this keeps the face of the tube cool. this depends on how bad the ...
...Mitsubishi 52525 still green light Wow! I'd rather put that $ into a new TV! I've called a repair service and it's going to be picked up tommorw... We are hoping it is nothing costly like what you ...
...tv keeps shutting off after 5 sec no picture or sound TV just shut off, when you turn it back on it shuts back off within 5 seconds like clock work. No picture, no sound. Good Day, checho3435; Look ...
...TV keeps shutting off TV just shut off, when you turn it back on it shuts back off within 5 seconds like clock work. No picture, no sound. Good Day, checho3435; Try this to help to narrow it down: ...
GREEN LIGHT FLASHING TV WILL NOT RESET WITH BUTTON DEPRESSED, LIGHT JUST CONTINUES FLASHING. Good Day; This model is equipped with a self-diagnosis feature to help with diagnosis of shutdown problems.
...tv on at all? The flashing timer light is consistent with no pattern. Thanks again... Press and hold "Device" and "Menu" buttons for six seconds and see if you then get a patter of flashes pertaining ...
...mitsubishi WD-62628 projection tv, it automatically shuts off and then the little green timer light start flashing. Anyone have an Idea of what is possibly going on? Mitsubishi WD-62628 I try to turn ...
Question about WS-55411 55" Rear Projection Television
turn on the power and the green LED blinks on the front for a second, but tv does not power on MOST OF THESE SETS HAVE A SELF DIAGNOSTIC: UNPLUG TV AND THEN PLUG BACK IN---TURN ON---GREEN POWER LIGHT ...
Mitsubisi wt-46809 will not turn on. i plug it in and it blinks 3 times then nothing. no error code when i hold menu and input keep in mind if you unplug set it clears the error buffer. Try to turn ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions