Questions & Answers for: Chevrolet Camaro missing part

Question about 1983 Camaro

2 Answers

...missing part of the breather assembly for my 1983 z28 camaro with cross fire injection. I need schematics to determine what is missing and then a resource for purchasing the missing parts. i cannot ...

Ad

1999 Camaro dies at a stop light it will only stay running if you give it a little power stall and I'm getting a running to rich bank one and two and a miss fire cylinder 6 I replaced pugs wires coil ...

Ad

replaced a digital EGR valve here while back took it in had a diagnostic done they said the reason chk engine light came on and it also had a miss in it they said #3 was causing the problem on the EGR

service engine soon light blinking /car backfiring and missing service engine soon light blinking/ back firing and missing / could this be the ecm or the catalitic converter If your check engine light

Engine sputtering/missing when accelerating, 97, 3.8 Camaro. This has been happening after a cold start and when gear is shifting into 2nd. At light the battery power drops and will surge. I have had ...

Question about 1986 Camaro

1 Answer

belt diagram for chevy 305 serpentine belt? you can get a free printout of the diagram from your local auto parts store if the sticker is missing from out under the hood

Question about 1986 Camaro

1 Answer

p1404 code on my 99 chevy camero 3.8 engine misses above 30 or so no power could an egr valve really cause this yes the egr is a very persnickity part. the code means that the erg is stuck closed. I ...

...missing a spring or something to hold the lever in its proper position. Any help guys? What I remember is a black plastic part in the side of the switch that the lever snaps into.  You may need ...

...the two little lines go,im thinking its the fuel pressure regulator or fuel pump? Loose lines? Missing O

Question about 1996 Camaro

1 Answer

car dies when motor is hot misses and dies and will not start back up til motor is cool There is a good chance your ICM has gone bad and will need to be replaced. you can remove it and have it tested ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...