...System Firing Order 1-4-2-5-3-6 4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System 99 Ford ranger 3.0 liter , change plugs,wires,coil pack and still have a #6 miss fire what else can it ...
...firing order 1 5 4 2 6 3 7 8 and the vehicle runs better but still misses and has LOW power. can anyone help I am confused.. Have put in new map sensor and engine computer again please please ...
ford ranger codes 305 306 what are they p0305 miss fire cyl 5 p0306 miss fire cyk 6
...truck codes saying cylinder 7 missing ,not firingI think The firing order starts #1 on pass side then 2 etc..... then 5 on frt other side then 6 then 7 is that right here is 4.6 firing order
...miss in the firing order I need a digoram of the firing order FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed ...
cylinder 3 and 6 are miss firing. What does that mean? if 3 and six are missing then replace the ignition coil
firing order on a 97 ford exporer. its got a miss and am wanting to see if it is right. also wondering if i could get a diagram sent. 4.0L OHV Firing Order Firing order for the 4.0 liter OHV V6 is 1-4
...6 keeps mis firing after new plugs and coil pack? after replacing all the plugs# 6 still mis fires and even after # 6 new coil pack it still misses, what is the problem?? could be valve probs or ...
Question about 2006 Fusion
...got a miss and check engine light want go off this is a 2007 3.0 v.6 need help please maybe the shorted coil took out the driver in the PCM (engine computer), if it's the same cylinder with
p0306 ford f150 indicates a problem with cylinder #6 miss firing or not firing. could be plug, wire, ignition coil if its coil on plug, fuel injector, poor compression.
Usually answered in minutes!
3,749 Questions
2,998 Questions
2,612 Questions
2,348 Questions
2,636 Questions