Questions & Answers for: Mazda Millenia misfire p0302

1999 mazda millinia idles rough and i scanned it the car said cylinder misfire ?? is this the plugs or the coil pack? If you havent tuned up the engine, its time. Those plugs have been in there for 10

engine skipping/misfiring, engine light flashing A few days ago my car started to skip/misfire when restarted after driving a while. I restarted the car again and it was gone, only to come back the ...

My mazda is misfiring with the engine shaking. I My mazda is misfiring with the engine shaking. I hestiates like it wants to die. We changed the spark plugs...but I don't know the order of fire. U ...

Codes: P0304 - Cyl 4 misfire P0170 - fuel trim malf B/1 P0173 - fuel trim malf B/2 P0300 - random - multiple cyl misfire P0105 - manifold absolute pressure/barometric pressure circuit malf P1524 - ...

My 2001 Mazda Millenia s just got the valve cover gasket, spark plugs and wires replaced. The engine now misfires after it warms up. I took it back and the shop replaced one of the plugs....said it ...

...Milleniacheck engine light came on. .car is running rough and hesitates while moving. codes says misfire on cylinder 6. Had tune up. put in new distrutor cap. Still drives really bad. . . Help ...

I have a code P0304 & P0325. The knock sensor and cylinder 4 misfire. How do I repair the problem Well we should always look at the lowest number codes first. So P304 is cylinder 4 misfire. We ...

misfire cyl 4. replaced wires, plugs, dist. cap., and rotor. still misfiring, what now? Is there not a more specific computer readout?(Mazda Mill. 1999 2.5l base type) It's possible you have a ...

p0302 #2 cyclider misfire Originally had #2 cyclinder misfire about 4 months ago. Did full tune up using NGK plugs and wires, etc.. Still had issues so then replaced all the fuel injectors. The ...

...p0302 refers to cylinder 2 --misfire detected ===causes--engine mechanical fault--wiring---ignition/ fuel system---injector--ECT/MAF sensor--ECM move no 2 injector to another cylinder and see if the ...