Questions & Answers for: Xerox Phaser misalignment

Question about Phaser 7700 Laser Printer

2 Answers

print cartridge "missing"--NOT Our Xerox 7700 is giving a message that the Number 4 print cartridge is missing. The cartridge is not missing. The message appeared after a staff member replaced print ...

Ad

Question about Phaser 7300DN Laser Printer

1 Answer

cyan toner misalignment cyan toner prints about 1/8th inch off That is an issue called a regicon adjustment that is off. You really have to have a laptop hooked up and the regicon set up. May need the

Ad

Question about Phaser 8500/DN Printer

1 Answer

Phaser 8550 Blurry Printed documents are very blurry, or double imaging, almost as if there is a misalignment. Machine is fairly new with less than 10k prints there is an encoder ring on your drum tha

Question about Phaser 7750DN Laser Printer

1 Answer

Xerox Phaser 7750 printing crooked Pages are not printing straight. There is a skew or misalignment of about 1/8" from the top of the page to the bottom, so everything looks angled or crooked. Any ...

Question about Phaser 7400/N Printer

1 Answer

...Sensor Actuator ■ Home Position Sensor ■ SNS Harness Is there any damage or misalignment? parts that need to be changed if still no fixed. Offset Home Position Sensor Rear ...

Question about Phaser 8560MFP Laser Printer

1 Answer

error 04,024,04:2667? Wiper Alignment Fault Wiper Blade Misalignment Errors Printhead Wiper Blade misaligned Test the Wiper alignment. Run the Service Diagnostics Check Wiper Alignment test.

Question about Phaser 8550/SDP Color Laser Printer

1 Answer

Gear grinding We had a paper jam which I think misaligned the gears causing them to grind. How can I realign? Sounds like your Process Drive Assembly has broken its mounting posts and the gears are no

Question about Phaser 7400/DXF Laser Printer

1 Answer

...check home possition sensor actuator home posiition sensor sns harness ... is there any damage or misalignment. replace broken parts. if that did not help Test the job offset home position sensor. ...

Question about Phaser 7400/N Printer

1 Answer

...or damage: Home Position Sensor Adjuster. Home Position Sensor. SNS Harness: is there any damage or misalignment? The rest of my steps can only be done in Technician's Service Mode and should only be ...

when i tray to print i got an error message; error print hsynch I cannot find anything in the Xerox knowledge-base on that error. I have two alternate solutions for you to try. First: 1. Power off the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...