color misaligned in RCA P52927 You can see the red, blue green and yellow color lines in the objects on the tv screen Hi,sounds like the convergence power supply reg.has failed,when this ic fails the ...
Question about P52926 52" Rear Projection Television
...voltages. You must have the set repaired by a qualified service technician. The usual cause for misalignment is that the television has been subjected to an impact or, in aging sets, the power ...
Question about R52WH73 Projection Television
RCA R52WH74 PIC IS DISTORTED LIKE HOUR GLASS FROM LEFT TO RIGHT AND COLORS ARE MISALIGNED SO YOU GET 3 IMAGES OFFSET FROM EACH OTHER IN DIFF COLORS The ITC222 convergence option missing repair kit ...
I am getting double imaging on my 52 inch RCA projector tv. I suspect it is convergence chips, but it also seems to have a bowed effect with everything looking crooked. Coud the projector itself ...
Question about HD52W56 52" Rear Projection HDTV
colors are out misalignment power flipped ona nd off and sense then clolors been misaligned The ITC222 and ITC222A convergence option repair kit from www.tvrepairworld.com should repair that issue. ...
misaligned colors We have a Hitachi TV. The colors suddenly went wavy at the top of the screen and are misaligned. Can we fix this ourselves? These chips are the culprit: ...
Question about D52W19 52" Rear Projection Television
How do I fix this problem with the color green misaligned? I checked the convergence board and power board to see if any fuses were burnt up but nothing. It only does it when certain things are on tv.
all colors are distorted If by distorted you mean misaligned, looking 3D you have bad convergence. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which ...
What is a good stk part number for rca HD52w59 tv. Colors are misaligned, screen appears bent/curved shaped, and cannot activate convergence option on the remote control device? sounds like you might ...
How to find convergence menu Is your convergence misaligned. Customer convergence is located in the main menu under setup. Now if you do not have this you most likely have the common and easly and ...
Usually answered in minutes!
2,410 Questions
1,124 Questions
809 Questions
789 Questions
510 Questions