not have it. I was able to unbind my box by dis assembling it. If you have one of these units never turn it on its side with cd in it this will lead to binding of the mechanism that controls the draws
...CD in, then 10 seconds later the drawer opens. I find I have to power up the P1120 15 minutes before I want to use it. Just power up and let it sit. After 15 minutes the drawer behaves as expected. ...
I works mechanically, but doesn't play the CD The changer turns on and moves the CDs around. When the CD gets under the playing arm (?), it lifts it up, holds it a few seconds then puts it back down ...
...CD NOT PLAYABLE, code is the result of a failed or burned out lens, or misaligned loading mechanism. It is possible that you have a dirty lens cap. you can try using a cleaning disk in this case to ...
...mechanism that controls, load,and eject the cd's You may need to dis assemble the unit to reset the black box containing the trays and cd's.sometines you get a ERROR message when the black box jams. ...
...mechanism. Since they are more expensive to fix than the drive is worth, replacement is your best option. In addition, since the CD remains spun up and the activity light doesn't go out, there's ...
...cd trays. If fault is consistent check the observation prior to the stop. does it stop on reading .. if so the mainboard may be running off in heat. If the fault occurs inloading then it might be ...
...cd player. If the loading belt is over sized then this problem can occur. Normally the loading belt will become over sized after a few years of use according to the weather condition. . If so the ...
Question about PD-H300 CD Player
...Dx50i my CD will not eject! It try but just clicks........help please Common issue and it due to a broken part in the tray loading mechanism. The best route based on price is to replace the CD
Question about PD-H300 CD Player
...CD's.....disc doesn't start to spin and then the drawer opens without scanning the disc....Please help. Hello, you have a problem in the mechanism that governs the drawer, possibly the belt has been ...
Usually answered in minutes!
60 Questions
50 Questions
33 Questions
30 Questions
29 Questions