Questions & Answers for: Boston Acoustics micro speaker

Micro Media Power supply Where do I find a place to order a power supply for my Micro Media speakers. The part number is 7000596 or 7000639 but I can't find anywhere to order it. It's a 12 volt 1.54 ...

cant find users manual for boston micro media systems 7000596 need 2 see how it is hooked up to my computer thank u Plug red and white cables into woofer ports that are red/white Plug purple lead into

i have some boston micro media system that is older but perfectly fine but i want to install it on vista from 95 where do i get a driver have you tried plug and play? Not familiar with Vista yet.

I have an older Boston Micro Media System and lost the 12 volt power supply. I need to know the milliamp rating so I can purchase a new power supply. Part #7000596 Date#804 Thanks, Doug previous ...

left speaker has developed a hum. Checked connections and all seems well. Sounds raspy like the speaker has blown. This is likely due to a problem with the amplifier. You may have turned up the amp to

...Micro speaker to repair a broken speaker terminal. I removed the 4 screws that hold both halves together. Now what do I do? It does not come apart easily.... Thanks, Lou There is rubber like sticky ...

Micro media system(Model # 7000596) This is your model # RIGHT ?? 1 is a red RCA jack- and 1 is a White RCA jack(that plug into the subwoofer cabinet !! The other end should be a slanted/or angled two

...after powering off, the speakers buzz loudly with a static noise. Hogwash, memory cap has damaged micro. Unit turns off briefly, there are no relays by the way, and then it comes back on by itself ...

loud humming sound when I plug in the 12V in Make sure that the input connection ground is good. If that does not cure the loud hum then you have a power supply issue.

boston micro 95pv sub-woofer is blowing 3A Slow Blow fuses. is a 95pv model. Keeps blowing a replacement fuse - 3A slow blow fuse. Wrong fuse? I would expect a shorted component in the power supply