...rca cables....nothing & with digital optical cable and still the mic won't work.Any ideas anyone.Thanks I replaced this unit with another one I got on Ebay (different brand). Had the same problem! So ...
...Mic receiver, then took an RCA cable and plugged that into the other end of the converter then into the DBS port on the JVC receiver, turned everything on and ta da nothing. However, I wondered about ...
...mic arm. Unable to rejoin the two wires so throwing unit away. I think the key to longevity with these RCA's is to not swing the arm from end to end - treat it gently, leave it in place for either ...
RCA CB?I'm lost will try anything. Thanks... This has worked for me in the past Pin 1: Shield and Blue (Mic shield and PTT ground) Pin 2: White (Mic Audio) Pin 3: Red (PTT) Pin 4: No Connection or Mic
...RCA Y Adapter When dealing with audio components there are three different sound levels: Mic, Phono and line. Each requires different amounts of amplification to work properly. Phono levels usually ...
...working just bought Philips DVD player model # dvp3360k and a philips microphone. The karaoke function does not work and the mic seems fine because I tried the mic with my computer. Help! Thanks Hi, ...
Question about Rx 1202fx 12 Channel Line and Microphone Mixer
rca wires do i need what kind of mic and will it work off a soundblaster external soundcard and if possible i'd like to have a drawing to show what goes where We have no way to enter drawings on FIXYA
...a rca co-pilot cb and i would like to know what kind of power mic will work with it can you help me any mic will work on any radio. just need the right wiring or ohm impedance(new mic on old
...mic working on my advent A10100, my web cam works fine but not my mic, can you help me please The amplitude of microphone's signal is too small. It must be amplified before to get it on RCA tv audio ...
Question about DeltaForce CB Radio
RCA 4462 button will not work I dnt know what going on. Everything else works. The mic is still good. But when I put the tape in all I see is "Tape" and when I press the REC button nothing at all. He ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions