Question about PL913S 19" Flat Panel LCD Monitor
...up away from the power board. on the vga board you will find 6 capacitors all grouped together 470 mfd at 25 volts they will be blown. solder them out and be careful you solder in the capacitors
ma-982kc (900P) hi 19"proview model ma-982kc computer switched on monitor switched but screen black some times get fuzzy lines down the screen if you keep switching on and off eventualy normal screen ...
Question about PL913S 19" Flat Panel LCD Monitor
...over and you will see a grouping of 6 capacitors that are blown you may also see another single 120 mfd at 25 volts blown the capacitors are rated 470 mfd at 25 volts but look at the side of one when ...
...post from Delphiuser) The capacitors are probably from a Chinese company called Xandu and I'm currently looking for a replacement capacitor to fit the circuit. Its a 470 mf cap with a 25 volt rating
LCD display Proview I have a 19' Proview LCD display. Recently it startet turning off by itself after working for 4-5 sec.We connected it to another pc and the display acted the same way - it worked ...
...bad capacitors. Go to radio shack or electronics supply store buy the same capacitors with the same mF and volts. If you can't find the same ones then always go with higher voltage. Replace the bad ...
The green light comes on then turns to yellow. I have a Proview PD46AG1 and when I plug the power cord in a flip the little switch on the back a yellow light comes on in the front and then immediately
i need a power cord for my monitor Hello, We carry the power cords on our site. Go to : http://www.ccl-la.com/catalog/index.php?cPath=25 The cord you are looking for is the cloverleaf cord. Buddy ...
The moniter blacked out, blue light is saying the moniter is still on, but screen looks like there is no power. When you turn on the moniter, the screen shows up for a few seconds, then blacks out ...
Usually answered in minutes!
169 Questions
42 Questions
47 Questions
27 Questions
20 Questions