Questions & Answers for: metal screen water inlet whirlpool

...water, and check the small metal screens inside the opening on the valve. Make sure they are clear of rust or debris and check the solenoids using a multimeter or ohmmeter. Check for continuity. A ...

...screen. why? This code typically indicates a fill problem. Much of the diagnosis of the problem depends on whether there is water getting into the machine. If there is no water getting to the machine ...

...metal screens inside the openings on the water inlet valve. Make sure they are clear of rust or debris. (Especially the cold water side) Check the solenoids using a multimeter or ohmmeter and testing ...

...metal screen, a little bit of sediment but not much, I have a pre-filter to the whole house....TODD The F70 and F71 error codes on this model of washer indicates a communication problem between the ...

...screen actually, can be accessed by removing the large metal panel below the door. Behind this panel, you'll find the drain pump, which has an access plug that turns out. Make sure you have a few ...

...metal/plastic screen. Is it clogged with dirt/sand or whatever? If so, there is your problem--CAREFULLY, using pliers, pull the screen out and wash it out if it's plastic. If it's made of a fine wire ...