media actually loaded in the paper tray. To attempt a resolution for this issue, please do the following: Press the green GO button on the printer operator panel. Printing will resume, but the printer
...media slot on the far right.(omoademola) Using the top control panel Printing tasks Scanning/Copying/Faxing tasks Troubleshooting The top control panel lets you print an image from a photo card, scan ...
...button. Locate the text Print Quality . For Print Quality, choose Best or Presentation . Look for the text Paper Type , Media , or Media Choice . If you do not see any of these options, click the ...
...button (A) to lower the tray. Remove any partially fed media from the feeder. NOTE: Make sure the stack of print media is straight and pushed all of the way into the feeder. Incorrectly loaded paper ...
...button (A) to lower the tray. Remove any partially fed media from the feeder. NOTE: Make sure the stack of print media is straight and pushed all of the way into the feeder. Incorrectly loaded paper ...
Question about P4350 All-In-One InkJet Printer
...I CANNOT ADJUST THIS. CAN YOU HELP PLEASE Your printer supports a wide variety of paper sizes. See Media guidelines for illustrations of proper paper orientation. The printer determines the size ...
Question about X3470 All-In-One InkJet Printer
...in the users manual it doesn't scan. you should be able to use the import media option in any of your office or photo sodeware. there should also be a scan to or a start scan button on your ...
did not feed properly What you can do -Load media into tray and press Continue button to resume printing. -Check that the media is loaded correctly in tray -Press Cancel button to cancel the print job
...media you are printing on supported in the printer? Ensure that the paper type is set accurately on the printer operator panel (go to Menu/Paper Menu/Size-Type/Tray1/Type). Is the paper type set ...
Question about X6170 All-In-One InkJet Printer
...program supplied with the Printer), run the utility and let the Printer Install. If you do not have a setup media, try adding a printer manually using "add a printer" button in the menu bar.
Usually answered in minutes!
1,487 Questions
1,353 Questions
1,277 Questions
961 Questions
741 Questions