Questions & Answers for: measurements aiming headlights

Question about 2006 Tucson

1 Answer

...aiming how do i aim my hyundai tucson headlights? i just replaced a bulb in the front right light and need to re-aim it. help? on each headlamp assembly, there will be either one or two plastic nuts ...

Ad

...aiming too high compared to the drivers side. Is there a way to adjust the headlight down? on each headlamp assembly, there will be either one or two plastic nuts that you can turn. If you only have ...

Ad

Question about 2005 RX-8

1 Answer

2005 RX8 headlights How are the headlights aimed? on each headlamp assembly, there will be either one or two plastic nuts that you can turn. If you only have one nut on each, that will adjust the ...

Question about 2005 RX-8

1 Answer

high beam adjustment, how do you do it seams mine are reaching for the stars thaks john in wisconsin two screws on each headlight control the direction the headlights are aimed. One screw, usually at ...

Question about 2008 Astra

2 Answers

opel astra headlight adjustment 2008 opel (saturn) astra headlight adjustment. the factory adjusted them too low. two screws on each headlight control the direction the headlights are aimed. One screw

Adjust the headlight beam on 2002 Subaru Outback How do I adjust the headlight beam on my 2002 Subaru Outback? I understand I need to park 30' from a wall on a flat surface, but I do not know what to ...

Question about 2000 Silverado 1500

1 Answer

...measurements can I use to line up the headlights on a 2000 Chevy Silverado when I line up on a wall? i always measure the center of headlights up from the ground. then i put vehicle 10 feet from wall ...

Which way does the manual headlight adjuster turn to raise the headlight up? Thanks About 200,000 results (0.57 seconds) Search Results How to Adjust Your Headlights - Aim Your Headlights ...

Question about 2000 Silverado 1500

1 Answer

...ford edge Don't try it yourself. Aiming headlights takes special measuring equipment. Take it to a shop that advertises headlight aiming. That way you won't get a ticket for improper headlight

aiming You don't need to measure up. Pull up to a wall, put the bumper against the wall and use a small level to aim the headlights level at the wall, then mark the wall with chalk where the main beam

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...