Questions & Answers for: measurement Cars & Trucks

Ad

Question about 2001 Taurus

1 Answer

the center of one of the opposite lugs. the bolt pattern is then in the format of (number of lugs x measurement between them) so in your case it will be a 5x(measurement

Ad

wrecked 2004 suburban how do you measure the frame to see if it is bent , car was hit on passenger side bent frame horn to the right. set off the air bags. Well you can measure from the lower front ...

Ad

Question about 2004 Suburban

2 Answers

...a tape measure and measure from the center of one hole in the rim to the one next to it. write that measurement down. Now measure from the center of one of your lug nuts on your bravada to the center ...

how to check oil level in a 2004 clk 500 it is electronically measured via your car computer. Do not start your car if you want to measure the level. It has to be cold when being measured. Insert the ...

Question about 2004 Suburban

1 Answer

...a tape the distance between the left and right rims 1/2 way up on the front of the rim. Record this measurement. Repeat the measuring at the back of the front rims at the same level as the front ...

...or 4 1/2 inches whatever the tape measure says then your bolt Pattern is the number of Studs by the measurement which means for example 5 X 5.5 that's your bolt patter and if they ask for hub that's ...

...and float drop are both measured with the gasket in place. Having said that, here are the following measurements. Float level is measured between the edge of the float seam and the formerly mentioned ...

Question about 2005 Ram 1500

1 Answer

How to convert 14 to linear inches linear measure is a length measurement so if you have 14 inches ,that is linear measurement if you have metric measure and you want to convert to inches, 14 " equals

...you will need a 1" af socket if it is a metric nut then measure across the flats and then take the measurement to a good tool shop and find a socket that has that measurement across the ...

1998 cadilac deville passenger side climate control not working, what should the voltage be? Turn the ignition switch to the ON position. Turn the passenger climate control to full hot. Measure the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...