Question about MiniView GCS62 2-port KVM Switch
...mean that the keyboard and mouse will no longer respond and I have to reboot (albeit if I touch the keyboard again after it boots windows, I lose functionality again). I have an ASUS PSP800, 1 gig of ...
...out? if you tried to connect your mouse to the keyboard port and still it doesn't work. Power cycle meaning unplug the KVM from the CPU, monitor, keyboard and mouse. Then wait for about 30seconds ...
...onced pressed and if you press the connect button of the keyboard the blinking will stop which means that the receiver picked the keyboard out.... hope it helps To isolate the problem, please ...
...model or brand that would work correctly. As you can see, this KVM switch is a bus powered device (meaning it only gets power from the USB ports of the computers). If the computer cannot provide ...
Question about MiniView GCS62 2-port KVM Switch
...while the others were turned off. I believe that IOGEAR recommends direct connection to the KVM meaning no adapters or port replicator behind it. You may also try this workaround, power off both ...
...+ Alt + Delete command. Quickly tap these keys using the keys on the same side of the keyboard. Meaning if you start with the left Alt key the also use the left Ctrl and left Shift. When
Question about MiniView GCS62 2-port KVM Switch
...you get on some of the better keyboards. If thats what you mean by connect to internet then its a common drawback of cheaper end KVM's even some of the better ones dont support fancy keyboard
...the keyboard and mouse in a different computer. Last, contact IOGEAR and have them RMA the device. Meaning that the mouse has a hardware defect. Thank you and good
Usually answered in minutes!
51 Questions
23 Questions
29 Questions
20 Questions
12 Questions
