Question about 8" LX90 LNT Schmidt Cassegrain Telescope with SmartFinder w/ FREE UPS
MEADE LX90 TELESCOPE Hand controller went completely dead while using it one night. Tried different battery packs. Will not light up. Check coiled cable continuity at both ends. ch'k ok. Red led still
...Meade telescope you have -- however- There should be a light somewhere on the telescope that lights up when the power is on-- if this is not glowing-- double check your batteries-- better yet use an ...
Question about LX200R 8 in. (600 x 203mm) Telescope
Meade ETX 70 telescope won't turn on regardless of power source I have a Meade ETX 70 telescope that I received as a gift several years ago. Because of work responsibilities I was unable to find time ...
...The readout screen is dead or at least will not light up. Can it be repaired? or is there a compatable hand box from a newer model or ????? Contact Meade here: ...
Question about 494 AutoStar Telescope Control Unit (Handbox only)
.... Not very expensive. If after installing a NEW cable it still does not light up then time to buy another hand controller. http://www.meade.com/support/index.html
Question about DS-2114 ATS (325 x 114mm) Telescope
reversing the cable. (depends on the Meade telescope). If a new cable does not fix it, then you will have to buy a new controller. Never plug or unplug the hand controller while the scope is turned ON
Question about 8" LX90 LNT Schmidt Cassegrain Telescope with SmartFinder w/ FREE UPS
...Meade LX90 when I switch it on the red led light displays but the autostar doesnt light up I thought it may be the hbx cable? So I bought a new one and I still have the same problem the autostar hand ...
Question about ETX-125AT (500 x 138mm) Telescope
...Meade last Friday. Still doesn't work. No lights, no nothing. You do have batteries ?? or getting power from 12 volt power supply? If yes -- and NO red light on the telescope control panel, then send ...
Question about DS-2114 ATS (325 x 114mm) Telescope
...telescope will not turn on. I changed the battery holder and put in fresh batteries but the red light will not come on. Any idea how to fix this? You could have a BAD hand controller cable -- try a ...
...Meade ETS-LX 6" telescopes which are used in an introductory astronomy lab. I have upgraded the firmware and other files in three of the six and they are working fine. The other three do not ...
Usually answered in minutes!
284 Questions
229 Questions
170 Questions
130 Questions
106 Questions