...clutch master cylinder or possibly the slave cylinder at the gearbox. With the age of the vehicle and the cost of the parts I'd recommend replacing both. This may not be something you want to tackle ...
...mazda protege I've got it loosened from under thehood but how am I suppose to get it from the inside? there is nothing to loosen on the inside, just the lines and bolts on the outside. It just has a ...
...mazda mx6 brake fluid leaking its leaking into my car while its parked i have to pump brakes while driving to build pressure and constantly replace clutch and brake fluids whats wrong and is it ...
...is that either the master or slave cylinder for the hydraulic clutch have failed, it is always recommended that they both replaced together, u can bleed the clutch but the problem will occur
...Mazda mx-6=gear shift My gear shift has been getting harder and harder to put into gear. Especailly in the mornings. Also in the mornings if i try to put it in reverse it grinds but i eventually get ...
...will most likely soon after. Then bleed system again. Most likely cause would be the clutch master cylinder. The fluid is just bypassing in the master cylinder instead of pushing the slave
...clutch on mazda cars shares the same fluid reservoir as the brakes. Bleeding the clutch is just like the brakes. The clutch slave cylinder is on the front side of the transaxle. You can find it by ...
the clutch pedal sticks to the floor why? If you have checked your fluids this is most likely your master or slave cylinder.
...Mazda mx6 Ls... Everytime I step ******* the brakes, the brake icon on the dash, lights up. As soon as I ease off it goes away... Can anyone tell me what might be causing this When my MX6 was doing ...
Usually answered in minutes!
132 Questions
87 Questions
81 Questions
59 Questions
40 Questions
