Questions & Answers for: maytag washer makes loud bang

Ad

Question about MAH6500 Neptune Front Loading Washer w/Built in Water Heater

1 Answer

Maytag Neptune model # mah6500aww: makes banging noise and causes machine to move when I star the cycle, it makes banging noise. The banging is so strong that it causes machine to move physically . I ...

Ad

Question about Bravos MTW6600T Top Load Washer

1 Answer

makes a loud banging noise Hello, The banging noise is from loose lower front weight mounting bolts or a loose bolt securing the driven pulley. Check the motor adjustment bolt for tightness. The noise

Ad

...maytag performa top load washer PAV2200 stopped in the middle of wash cycle and we heard a loud pop and then smelled burning rubber. My husband has pulled the belt off the bottom and its still in one ...

Maytag Centennial washer makes loud bang and the end of cycle. My washer is 2 years old now. It still washes fine with no leaks. At the end of the cycle in stops with a loud bang and it appears to ...

Question about ETW4400TQ Top Load Washer / Dryer

1 Answer

...makes a clunking noise LOUD NOISES IN washing MACHINE; LOT OF THINGS TO CHECK, THE BELT LOOSE OR WORN, THE CLUTCH, THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM BEARING, the ...

...washer has a loud banging noise during spin the balance weight may be loose. This weight is to counter act the weight of the motor so you will find the weight directly behind the motor. Sometimes ...

...washer makes loud knocking noises and vibrates during operation, so far it completes the wash cycle. Model # MVWC4258WO, Serial # C42131104 LOUD NOISES IN washing MACHINE; LOT OF THINGS TO CHECK, THE ...

Maytag mo#mav4775aww when in spin, it is noisy like bad bearings and stops very fast when you open lid LOUD NOISES IN washing MACHINE; LOT OF THINGS TO CHECK, THE BELT LOOSE OR WORN, THE CLUTCH, THE ...

...washer has a loud banging noise during spin the balance weight may be loose. This weight is to counter act the weight of the motor so you will find the weight directly behind the motor. Sometimes ...

...washer has a loud banging noise during spin the balance weight may be loose. This weight is to counter act the weight of the motor so you will find the weight directly behind the motor. Sometimes ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Brad Brown

Level 3 Expert

18726 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...