Questions & Answers for: maytag agitator lifting

...the agitator to clean the inside ? Maytag model LAT9806AAE.Thanks. There is a 1/4" machine screw in a recessed hole close to the bottom of the agitator. Remove screw. Lift agitator off agitate

...agitator, undo the bolt (4) with long socket extension and then lift out. Not sure if you can see the seal ("O" ring at this point, you may need to remove the inner drum. Isolate the supply. Lift the ...

agitator on a Maytag Performa comes off by removing the center post cap and dispenser by pulling on it. Locate the agitator bolt and loosen (you may need to hold the agitator in place while loosening)

Maytag MAV5000 washer will not agitate The washer runs through the cycle, but it does not fully agitate.(It barely agitates.) HI. Lift the washer up and see if drum drive belt is broken or direct ...

...actual screw: http://t2.gstatic.com/images?q=tbn:ZzdG516FVV4rCM:http://www.easyapplianceparts.com/assets/PartImages/348478_1_s.jpg Thanks for choosing FixYa. ...

...the agitator from a Maytag Washer PAVT-1 in order to untangle caught cords Open the lid, remove the Fabric dispenser, then you will see a nut in the agitator, remove it and lift the agitator

maytag washer agitator lift from male assembly when washing agitator is lift off "male" portion of assembly?. use the logic sense see the diagram the shaft can be loose, or the bolt is ...

maytag washer agitator is lifting from male portion during wash cycle female portion of agitator is lift from male portion you must examine every part, may be the drive shaft the bolt is broken you ...

Maytag Washer Model LAT9206BAE, I have cleaned the washer but my clothes are still getting a lint like substance on them. Is there a screen or something on the discharge that may be blocked. Model LAT

agitator in Maytag Bravos MCT. Removed bolt but agitator will not lift up. Any tricks? It happened to mine also. Nothing came out of a pocket, either. A scarf worked it's way in somehow and got caught