Question about PAV2300 Top Load Washer
...agitator keeps falling off. I am able to put the agitator back on , and I tighten the bolt but it keeps falling off. Also, during the spin cycle it make a knocking noise. I tried redistributing the ...
agitator keeps coming off I have a Maytag SAV-5 model, I think. That is what the use and care guide says. I noticed my washer was making a grinding type noise so when I checked it I found that when it
Maytag washer Top loader washer - won't spin or agitate. Smell rubber burning. How do I open front panel to check belts Matag Top Loader won't spin or agitate. Hi the problem will be the belt has ...
Question about MAV7600 Top Load Washer
...Maytag Washing Machine - Top Loading "Heavy Duty" model Agitator keeps coming loose during wash/spin cycle. What can I do to fix this problem? There is a screw near the base of the agitator. If it is ...
agitator maytag top load washer the agitaor is loose it want stay locked down it keeps coming up during wash cycle is there a clip that holds it down there should be a 7/16s bolt under the cap try ...
agitator. Some Maytag washers require the use of a flat head screwdriver inserted between the dispenser and the top of the agitator. Twist the handle of the screwdriver to pop the dispenser off of the
Question about 3.2 cu. ft. Top-Load Washer
Maytag Performa Model# PAV 2300 AWW agitator & larger wash load I have a Maytag Performa Model# PAV 2300 AWW washer and during washing cycle if it's washing load larger than ''large'', the ...
Question about 3.2 cu. ft. Top-Load Washer
...maytag atlantis mav8600aww. Bought a new belt. Worked for fine for about a month. Began hearing a noise that sound like the motor was flopping from side to side while it was runing, even though load ...
Agitator screw keeps coming out. I have a Maytag Performa PAV 3300 washer. The screw that holds the agitator in place keeps coming out periodically. How can I fix it? New parts !! Threads are worn and
agitator bolt keeps coming loose The agitator is in 2 pieces, the top piece is bolted to the bottom piece after mating top and bottom spline sections together. This bolt keeps coming loose and the top
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions