Questions & Answers for: l max reset Cars & Trucks

Question about 2003 Ranger Regular Cab

2 Answers

...max main required light how do you reset the light on a 95 mitsubishi mighty max. If you are speeking of the check engine light you can disconnect the battery for a few minutes then reconnect it and ...

Ad

Question about 1995 Mighty Max

1 Answer

Mitsubishi Mighty Max automatic...would like to reset engine light...do you know the sequence? Thx That red warning light because you started with to much pedal down? Disconnect battery for 15 minutes

Ad

Question about 1990 Mighty Max

1 Answer

...Max '90, if you remove the dash panel , the one with the cluster gauges, you will find a push button that resets the engine maintenance light. It's a thing that wont reset by itself and lights up at ...

Question about 1991 Mighty Max

1 Answer

Max? First I'd say try taking the battery cable off the negative terminal to reset the computer.  Then what I would do is pull the codes from the computer. Autozone will read your codes for free!

resetting ford c max 1.6 petrol engine management light hi, i have a 04 i.6 petrol c max , and has a slight flat spot in 2nd 3 and so on at low revs , is this normal, only got car today.

Question about 1990 Mighty Max

2 Answers

reset maintenance required light for 1991 mitsubishi mighty max there is a small switch behind one of the switch blank off plates to the right of the steering column. It is a very small switch about 6

Question about 1990 Mighty Max

1 Answer

...power is there a main fuse or reset someware there is a main Max fuse in the under hood fuse box . i think this box is on the drivers side fender . I think the Max fuse is either 60 amp or 120 amp ...

Question about 1992 Mighty Max

1 Answer

...do I go about manually resetting the maintenance required light on my 2.4L 1992 Mitsubishi Mighty Max pickup truck? When service to the emission control system has been completed slide the switch

...Max has 170,000 miles on it and maintenance light came on and will not go off is there a reset button for maintenance required light Yes, unplug the battery for 30 seconds, and the ECU will reset. If ...

ford c max goes in limpmode dpf blocked fitted dpf egr and dpf presser sensor sill goes in limpmode Requires fault codes to be reset, this will require a code.reader with your models software.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...