Questions & Answers for: Yamaha DT 360 match point

...and had a tank seperate for oil, but...32:1 will work if it's pre-mix, just jet the carburator to match that and you will be

I have a RT1 Yamaha 360 that appears to be a hybrid between a 71 and 72-23. VIN is RT1-20289. I can't seem to find anywhere that will tell me what year the VIN translates to. Get an id puller, take ...

I need to know what the ingnition timing specs are for a 73 rt 360 with points ignition how many mm btdc? Points gap should be .015 thousandths. The stock timing is 1.8mm btc. Race timing is 2.0mm btc

how do you set points for a 1974 yamaha 500 hello, old school bikers woud use a match book cover, get the lobe up , open points, close them to barely touch match book flap, tighten down see if it ...

i need to know how to set the points on a 1976 360 yamaha gain access to the points, behind the side engine case. once you can see them, turn over the engine slowly, till you see the points at there ...

...Now loosen the ohld down screw and adust the points gap to about .016", or the thickness of a matchbook cover or business card. This should get you close enough to tell if the points are part

Have a1975 175 enduro, acts like needs timeing, can't figure out how to check or adjust. Got any help? Before I explain the timing, I want you to check the crankshaft bearing on the left side, ...

what are the point setting for yamaha 100 dirt bike? I don't need help on a DT 360 But I had to pick something so I could ask the question I need help on and that is point setting for an old yamaha ...

MY 1969 YAMAHA ENDURO WONT GET SPARK OR FIRE IVE CHECKED EVERY THING I NEED SOME TIPS FAST Fisrt check the plug and plug cap. Remove this and see if you have spark from the HT wire. Check points are ...

What is the points gap for a Yamaha LT2 Factory spec is .014" First, file and clean the contacts. The procedure is to set the timing and THEN check the point gap. If the gap is too wide, bend the top ...