Questions & Answers for: masterbuilt electric smoker power

...Masterbuilt electric smoker 4x and went to use it today and my controller was flashing heat but i couldn't use the time or temp is there anything i can do? I had the same problem this morning. I ...

Electric smoker is now tripping GFCI breaker Electric smoker is now starting to trip GFCI breaker whereas it has never before now. Hi, GFCI breaker tend to wearout and become more sensitive after time

...Masterbuilt Digital Smoker no longer heats up and digital display has stopped working completely. The unit acts like there is no power to it and is completely dead. By replacing the digital component ...

...power to my smoker but the heating element is not getting hot. What can I do? Get a voltmeter or multi-tester, test power to the element. If there is power, then heating element is bad. If not power ...

...smoker won't heat. The light on my digital panel won't turn on, but the temp numbers and time will Hi, You must check and test the entire eletrical power cord... Take a look in the power cord ...

...can power down completely. If you get the same result when you plug it in and try again you might need to replace the controller. Masterbuilt recommends contacting them directly at ...

...Parts http://www.appliancefactoryparts.com/gasgrillparts/brands/masterbuilt/20070106.html They stock most parts for your model Masterbuilt Smoker. Hope this helps you and thanks for choosing

...Masterbuilt Electric Smoker owner to have this problem. The Model 20070106 has been plagued with electrical problems from day one. Maybe, that's why it only has a 90 day warranty? As far as parts ...

...masterbuilt electric smoker. When we power it on, we get the message EAA1 and it shuts off. Take off the electronic control unit and make sure the probe is still connected (unplugged and check the ...

...smoker model no 20071317 I have purchased a new control board for my Masterbuilt ...